|
The XP-CPRO2L lift access controller can
be used to control the access to the levels in the building.
It uses the Mio-R16 to control the access to each of the
floor. Each card holder is assigned with a floor zone
setting which contains the information of how he/she can
access to each of the level.
You may configure that the card holder
only able to access to a certain levels but denied entry
into others.
The XP-CPRO2L lift access control system
can be used together with other MicroEngine's door access
equipments under the management of a single software system
– xPortal2007 or xPortalNet. In this way, the accessibility
of the card holder into each of the area including the
control inside the lift can be managed from a single point.
| AccessPortal
XP-CPRO2L Lift Access Control System |
|---|
| No |
Feature |
Functions |
| 01 |
Autonomy |
Distributed data and processing |
| 02 |
Downlink |
2 wire RS485 |
| 03 |
No of CDP |
2 |
| 04 |
No of floor |
64/COP |
| 05 |
Battery backed real time clock |
Yes |
| 06 |
Onboard rechargeable battery |
Yes |
| 07 |
Card number |
6 digits |
| 08 |
Continuous reads when door left
open |
Yes |
| 09 |
Operating modes |
Card only |
| 10 |
Time zones |
255 |
| 11 |
Time set |
255 each with 3 intervals |
| 12 |
Holidays |
30 |
| 13 |
Onboard Watchdog Circuit |
Yes |
| 14 |
Auto lock release by time zone |
Yes |
| 15 |
Cardholders |
10,000 |
| 16 |
Events |
20,000 |
| 17 |
RAM memory |
At least 128KByte
|
| 18 |
RAM protected by On board battery |
Yes |
| 19 |
Firmware EPROM/flash memory |
At least 128KByte |
| 20 |
Addressing via switch |
Yes |
| 21 |
Onboard buzzer |
Yes |
| 22 |
UCommunication ports |
RS485 |
| 23 |
Polarity protection for power
connector |
4 digits |
| 24 |
Power |
12VDC |
| 25 |
Relay interface unit |
MTR16 |
| 26 |
Reader Interface unit |
MK800 |
|
Access Control System (6) 
.jpg&w=135&h=100&page= "Camera Housing Bracket")
