|
|
|
 |
|
|
|
|
|
|
|
|
 |
|
The XP-CPRO2L lift access controller can be used to control the access to the levels in the building. It uses the Mio-R16 to control the access to each of the floor. Each card holder is assigned with a floor zone setting which contains the information of how he/she can access to each of the level.
You may configure that the card holder only able to access to a certain levels but denied entry into others.
The XP-CPRO2L lift access control system can be used together with other MicroEngine's door access equipments under the management of a single software system - xPortal2007 or xPortalNet. In this way, the accessibility of the card holder into each of the area including the control inside the lift can be managed from a single point.
|
|
|
|
|
|
|
Access Portal XP-CPRO2L Features
|
|
|
 |
|
No |
Feature |
Functions |
|
01 |
Autonomy |
Distributed data and processing |
|
02 |
Downlink |
2 wire RS485 |
|
03 |
No of CDP |
2 |
|
04 |
No of floor |
64/COP |
|
05 |
Battery backed real time clock |
Yes |
|
06 |
Onboard rechargable battery |
Yes |
|
07 |
Card number |
6 digits |
|
08 |
Continuous reads when door left open |
Yes |
|
09 |
Operating modes |
Card only |
|
10 |
Time zones |
255 |
|
11 |
Time set |
255 each with 3 intervals |
|
12 |
Holidays |
30 |
|
13 |
Onboard Watchdog Circuit |
Yes |
|
14 |
Auto lock release by time zone |
Yes |
|
15 |
Cardholders |
10,000 |
|
16 |
Events |
20,000 |
|
17 |
RAM memory |
At least 128 KByte |
|
18 |
RAM protected by on board battery |
Yes |
|
19 |
Firmware EPROM / flash memory |
At least 128 KByte |
|
20 |
Addressing via switch |
Yes |
|
21 |
Onboard buzzer |
Yes |
|
22 |
Communication ports |
RS485 |
|
23 |
Polarity protection for power connector |
4 digits |
|
24 |
Power |
12VDC |
|
25 |
Relay interface unit |
MTR16 |
|
26 |
Reader interface unit |
MK800 |
|
|
|
|
 |
|
|
|
|
|
